Choose the most suitable Ofuro bath                                 eng         est         rus         lit         lat         ukr         fin         ger       

 
HEM PRODUKTER ORDER

F.A.Q.

KONTAKT

   

Vilket material är badtunnan gjord av?
    Tunnan är gjord av högkvalitativ sibirisk furu, banden som håller ihop den och värmaren är av rostfritt stål.

Hur tömmer man ur vattnet?
    Det finns ett utlopp i botten där man kan koppla en slang och man kan även koppla till en pump om man vill.

Vilket träslag används för att elda med?
    Vi rekommenderar björk men det går även använda annat, men trä med högt kådinnehåll sotar mer och kräver tätare rengöring.

Hur sker uppvärmningen?
    Vattnet värms med rör på insidan och gör att det blir cikulation och man kan för att snabba på uppvärmningen röra om försiktigt. Träslaget man eldar med påverkar också, torrt och rikligt med ved ger ett snabbare förlopp, tiden beror på ett flertal faktorer som initial vattentemp, storlek på tunna, vilket träslag man eldar med, T.ex att värma Ofuro SR 1800 från 7 grader C till 27 grader C tar 2-3,5 timmar, till 35 grader C ytterligare en timma.

Hur länge kan den stå utan vatten under sommarperioden?
    Det rekommenderas inte att den är tom längre tid än 2 dygn i bra väder.

Kan man använda havsvatten?
    Ja, havsvatten påverkar inte vare sig träet eller stålet.

Font exploitation rules

        Font is made of natural materials, it means that there are som definite exploitation rules. There is not so much of them, so it cannot take a lot time to carry them into effect, but you will make up for it by enjoying Ofuro warmbaths for long years.
    It is advisable to fix Ofuro bath in 10-15 cm higher from the land and to check the horisontal level. The depth might be identical everywhere. Font can be fixed on wooden squared beams or concrete blocks taking in account that they can stand the weight of several tonnes. While placing the font, define the place where water will be poured out. That is why it is recommended to connect one side of hose up with sink at the bottom of the barrel before placing it.
    Fill the barrel with water in difference of 15 cm from top side.
    Start heating the stove when the pipe is minimum 10 cm in water.
    In warm season it is advisable that barrel is filled with water.
    It is recommended to process the font with protective means at least once a year.
    For cleaning and taking care of barrel are suitable pool cleaning means.
    In winter do not let water freeze. After using the barrel pour out the water before it starts freezing.
    It is expected to clean the stove after 3-7 uses.
    In case if font is not used for a long time, the material can dry out in consequence of air moisture change. There is no need to worry: it is not a defect, it is a display of used materials property. In this case you must only tighten up the nuts on the hoops and fill barrel with cold water. And, of course, do not leave a font empty in sunny and warm weather. Avoid straight sun beams not to cause drying up, also exclude ovens and radiators influence.

Doctors advice
    When water is about 40oC, the best way of taking a bath is when you are half-lying and heart is above the water.
     In winter it is recommended to wear shoes while taking warm baths.
    Doctors have proved that regular Ofuro visiting is very good prophylactic means from cold deseases.

Copyright © BALTRESTO • All Rights Reserved       

Bath barrel